So let’s start with a review of what a fusible product is and the different brands available.
Fusible web is a thin, man made substance that melts when it is heated, thereby allowing two pieces of material to be fused together. It can be purchased by the yard, on a roll, or in flat sheets. I will be focusing on paper-backed fusible web which is just like it sounds – a double sided fusible that is backed with paper on one side.
Here are four of the most popular brands used for applique: Lite Steam a Seam II, Heat ‘n Bond Lite, Wonder Under and Shades SoftFuse. Let me tell you a little about each and why I like them (or not).
Lite Steam-A-Seam 2 by The Warm Company has a pressure sensitive adhesive side that allows you to temporarily position your materials until everything is in place. When you’re ready, you can press it for permanent placement. I like this product, but I find that figuring out the correct side to trace my shape onto is a little “tricky” and it’s not as thin as some of the other fusibles.
Wonder-Under (805 by Pellon) is a paper backed fusible web that is very thin and lightweight. This is a great product, but often the fusible will peel away from the paper before I’m ready for it to.
Shades SoftFuse is one of the newer products on the market and I’m really liking it so far. It is also very lightweight and has a paper backed side which stays put a little better than Wonder-Under. This is my number two favorite.
HeatnBond Lite is probably my favorite fusible web, especially for beginners. It’s very easy to use and it is lightweight, but probably not the lightest out of the group. Even still, I like the stability of the paper side and the ease of use.
So let me take you through the steps of machine applique using a paper backed fusible web. Then we’ll talk specifically about the sewing machine set up and stitches to use.
Step 1:Prepare your background fabric for applique. This is sort of like your canvas. It can be one solid piece of fabric or a pieced background using multiple fabrics.
In general, your background should be one inch larger than the finished measurement. The cutting instructions for most patterns will provide this extra amount for you, but double check to be sure.
TIP: If you don’t normally pre-wash your fabrics, this might be a good time to give it a try. The main reason is because the fusible product will generally adhere better to fabric that is free of chemicals and sizing. However, you will still find me working with unwashed fabric (cause I’m a little lazy or too anxious to get started) and I’ve only had an issue once so far.
Step 2:Prepare your applique shapes for tracing. When using this method of applique, whatever you trace onto the paper side of the fusible will be mirrored once it is applied to the wrong side of the fabric and then fused to the background. This is especially important when you’re working with an applique that has letters.
Many applique projects are symmetrical, therefore you don’t need to worry about reversing the images first. Here is an example of a symmetrical design:
If your pattern is asymmetrical, you will need to determine if the shapes should be reversed first, or if the pattern has already done that for you. The easiest way to reverse the image is by tracing it from the back side. You could also run it through a copy machine and select the mirror image option.
The next thing to look at before tracing, is to see what, if any, shapes will be overlapped by another. Most applique projects are made up of pieces that go in front of or behind one another. It’s smart to mark those edges on the pattern first, before you start tracing. You want to avoid having raw edges “butt” together, so overlapping or underlapping is necessary.
Here is the design that we will be working on for practice. You can find the pdf version here: Tulip Applique pdf. (Make sure to print it out with no scaling or resizing). It’s a simple tulip flower and it has one piece that needs to “slide” under the main flower. I place hash marks along the edge(s) that will be “underlapped”. Here is how it looks on my pattern:
Step 3:Trace the applique shapes onto the paper side of the fusible web. This is fairly easy to do. I usually use a pencil to trace with, and I make sure that there is at least 1/4″ of space in between my shapes. If a shape has been marked as needing to be underlapped, leave 1/2″ around that edge so that you will be able to allow for the extra compensation. I will often draw in the additional seam allowance so I don’t forget.
Step 4:Roughly cut out the traced shapes from the fusible web.
TIP: If I need to make 8 flowers from the same fabric, I can leave the shapes bundled together and cut them out in one large piece. This saves a little bit of time.
Step 5:Cut out the center of the shape if possible. I like my applique to be as soft and flexible as possible. If my shape is large enough, I will cut out the center of the fusible web, leaving a 1/4″ border around the inside line. This is especially helpful when I have pieces that are stacked on top of each other. All of that fusible will make it really stiff if left in place. In my example, the main tulip shape is large enough to cut away the middle, but the other shape is too small for that step.
Step 6:Press the fusible web shapes onto the WRONG side of your fabric. Check the instructions on your fusible product to see how long to press. In most cases, this will be a quick press, 2 – 3 seconds long. If you press for too long, it is possible to deactivate the “glue” of the fusible.
Step 7: Cut out the applique shape on the drawn line. Be very careful with this step as this will become the final shape of your applique. If you have an edge that is going to be underlapped, cut 1/4″ beyond that drawn line.
TIP: Having the right tool for the job will make this much more fun. I love scissors that have a micro-serrated edge for cutting out my applique shapes. These scissors really grip the fabric as you cut and because they’re serrated, the cut edges tend to fray less. My favorite brand is Karen Kay Buckley 7-1/2-Inch Perfect Scissors.
Step 8:Fuse the applique shape onto the background fabric. You will need to remove the release paper from your applique shape first. Position the shape onto your background fabric. (It may be helpful to find the center of your background fabric first by folding it in half and making a crease along the center.) Press the applique with a hot iron. Again, check the instructions for your particular fusible product. For HeatnBond Lite, you will press for 8-10 seconds, no steam.
TIP: If your iron is too hot, you could scorch your fabric. Be careful!
TIP: Sometimes an applique pressing sheet can come in handy at this point. These are made out of a non-stick Teflon and they can prevent any stray fusible from sticking to your iron or ironing board. They are also useful if you have a complex applique shape that you could “build” on the applique pressing sheet first and then adhere the entire unit onto the background fabric. The sheet is see-through, so you can place the pattern underneath it and line up the applique pieces on top of the pressing sheet and “glue” them together. This will then peel off of the sheet and be ready to press onto the project.
Step 9:Stitch the applique in place. This is a very important step. Guess how I know? My first applique projects are now starting to fall apart because I skipped this part. 🙁
The most common stitches used for this step are the satin stitch and the blanket stitch. You could also use a straight stitch, but there is more likelihood of fraying to occur.
I am going to devote an entire lesson to this last step, the stitching of the applique. So stay tuned for Part 3 – we will be getting to know our machines a little bit better by playing with the stitches and the settings on our sewing machines.
Here is a printable card that you can save or print for future reference:
If you would like to make this little tulip block, start with a 6″ piece of background fabric. After you have stitched your tulip applique, trim the square to 5 1/2″. Cut (2) 4 1/2″ squares of fabric for the corner triangles, cutting them in half once on the diagonal. Stitch to each side. You’ll need a scrap of batting, a 9″ piece of backing fabric and a 2 1/2″ strip of binding fabric to finish it.
I think this little tulip block would be sweet in a bigger project, yes? Yes! I’ll be finishing up this series with a table runner filled with tulips perfect for spring! Yippee!
My goodness, how did we get to March so quickly? I have lots to share with you today that I am sew thankful for in blog land!
The ladies at Quilt Inspiration have compiled a group of free patterns based on the classic “snowball” block. I love this block for showcasing various prints and it makes a great alternating block too. Take a look at what they found:
I think I have a few a lot of charm packs that would work well for this pattern.
If you have been saving your fabric scraps and you have one big pile (or closet) full of them, check out this post from Stitch This! on ways to get them organized.
Having organized scraps is key to actually using them! Maybe there is hope for me yet.
If you need a project to use up some of your scraps or orphan blocks, Lori Holt of Bee In My Bonnet has made the cutest barn and she incorporated a weathervane block to make it extra sweet! You can find the tutorial here.
I think this is sew adorable and Lori’s tutorials are always so well done and easy to follow. She also has a Quilty Barn Along Flickr Group if you decide to join along.
I can’t believe it’s March already! I miss those two days (29 and 30) in February. I’m kind of complaining because I didn’t finish my February UFO project. 🙁 I didn’t even pick it up once!
I have been so busy with other projects and then I got food poisoning and somebody decided to make February a “short” month! Sound like enough excuses to you?
I did get some hand quilting done on my “Rabbits Prefer Chocolate” quilt. I went to take a picture of my progress, and here is what I found:
My cat found a lovely nest to sleep in. I’m not sure if you can tell, but he is completely curled up in my quilt hoop! It seems to be the perfect fit for him, the little devil.
So for March I will be attempting (again) to finish the “Oh My Many Stars” quilt. You can find more information about this quilt in a previous post here. Click on the image below to see what everyone else is working on this month.
Another Sunday and sew much to be thankful for! Let me share some of the lovely goodness I’ve seen on the internet this past week.
Recently debuting at QuiltCon is the Quilt Design Tool from Threadbias. If you have wanted to play with creating your own designs on the computer, this is a great way to get started! There is a free version available to try out for as long as you like. When you’re ready, you can buy a monthly subscription to the full version for $10 per month.
With the Quilt Design Tool, you will be able to:
Build blocks as well as design full quilts.
Try out different fabrics from your virtual stash in your designs.
Choose from a variety of simple shapes or use our composed shapes to speed your work.
Use the free-form drawing tool to make any shape.
Manipulate shapes by moving, changing their size, rotating, or even adjusting corners.
Instantly add borders.
Pick a “snap” level and make drawing easier by having your shapes align.
Determine fabric requirements.
Keep multiple workspaces open at the same time.
Always have the latest version! We add new features very often.
Expect many new features in the coming months.
I played with the “lite” version and created a simple churn dash block. I think with a little more practice and patience, I might be able to create some interesting designs of my own.
Thank you sew much Martingale Publishers for making these beautiful, free patterns available to us! For more freebies from Martingale, go here.
Lately, I have been trying to improve my photography skills. I recently found this wonderful blog, It’s Overflowing. Last year Aimee Lane presented a series called Photography Friday and it was all about learning to use a digital slr camera in simple and practical terms. Yes, even I could follow along!
Even though this photography series is from last year, there’s plenty of great content to get caught up with and I appreciate the time and attention that Aimee put into these lessons. Plus, her blog is full of diy & decor projects, useful crafts, and organization tips worth checking out.
And I am sew thankful for you – the followers and visitors of my blog. I keep seeing the number of followers go up and I feel truly blessed that you spend a piece of your time with me.
I have so many new ideas to share with you, so be patient as I take pictures, write tutorials and edit my way through the computer. 🙂
The recommendations on this blog are purely my own and not paid advertising. I am an Amazon Affiliate (meaning that any Amazon links you click on and purchase from my blog, I get a very small percentage of) but this does not influence my opinions or content in any way.